OneSense Pulse and Current Device
Telemetry Device
The OneSense Pulse and Current is a compact cost-effective, battery-powered wireless sensor data transmitter/telemetry device. It powers the sensors connected to it, acquires, processes, and transmits the collected data to out middleware Cloud Integration Services (CIS) application for futher processing. OneSense Environment and Agriculture supports several interfaces and sensors, and is capable of acquiring data from multiple sensors, considerably lowering cost per sensing point. Using Evvos API and/or Webhooks (relays), sensor data is easily integrated with your appliction or portal of choice.
- IP66 Ingress Protection class
- Operating Temperature -20°C to +70°C
Supported Interfaces
- 2 x analog channels 4-20mA or 0-20mA or 2-10mA
- 1 x Pulse
Firmware
A new firmware, provided by Evvos,can be loaded in seconds to enable support for different message decoders and use cases (combination of sensors, connected to a device).
Typical Applications
- Industrial Monitoring
- Building Automation
- Water and Gas Utilities
Related Articles
OneSense Pulse and Voltage Device
Telemetry Device The OneSense Pulse and Voltage is a compact cost-effective, battery-powered wireless sensor data transmitter/telemetry device. It powers the sensors connected to it, acquires, processes, and transmits the collected data to out ...OneSense Environment and Agriculture Device
Telemetry Device The OneSense Environment and Agriculture is a compact cost-effective, battery-powered wireless sensor data transmitter/telemetry device. It powers the sensors connected to it, acquires, processes, and transmits the collected data to ...How to Access OneSense Configuration Options
OneSense devices are equipped with a USB port. Using a data transfer USB cable you can access the configuration opetion. This is very useful during the POC (proof-of-concept) phase of a project as it allows you to easily change certain settings - ...How to Turn a Device ON
Turning a Device ON Acoustic signals accompany LED color change in some OneSense models. See LED indication description for more information on differnet device states. To Switch a device ON/OFF - hold magnet on top of the ON/OFF symbol until LED ...How to Load Firmware
Unzip archived firmware files. Remove device's lid and install batteries in battery holder (observe polarity). Connect battery holder to your device. If battery holder is already connected to your device, disconnect it before installing batteries. ...