How to Open Enclosure Lid

How to Open Enclosure Lid

 

There are 4 quick assembly screws located on each corner of the lid.

Use Philips-head screwdriver to open/close the lid.

• Related Articles

• How to Connect a Sensor to a Terminal Block

  Connecting a Sensor to a Terminal Block OneSense is equipped with pluggable terminal connectors to ease the process of wiring sensors to the device. Unplug the terminal blocks from the header before beginning sensor wiring. This will help see the pin ...

• How to Access OneSense Configuration Options

  OneSense devices are equipped with a USB port. Using a data transfer USB cable you can access the configuration opetion. This is very useful during the POC (proof-of-concept) phase of a project as it allows you to easily change certain settings - ...

• How to Load Firmware

  Unzip archived firmware files. Remove device's lid and install batteries in battery holder (observe polarity). Connect battery holder to your device. If battery holder is already connected to your device, disconnect it before installing batteries. ...